Filter
Top Products
24
US
Telephone Features
4 Press (VOL/PGM).
“ENTER NUMBER” appears.
5 Enter the phone number.
You can enter up to 16 digits, including a tone
and a pause, each of which is counted as one
digit.
6 Press (VOL/PGM).
You’ll hear a long confirmation beep, and the
name and the number are stored. The display
goes off.
Notes
• If you intend to save a 51st phone number, you will hear five short error
beeps and “MEMORY FULL” will be displayed. You cannot store the phone
number. To store another phone number, erase one of the stored phone
numbers (see page 25).
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• If you have entered a wrong name or number in step 3 or 5, turn Jog Dial
down to erase it. Then enter the correct name or number.
• You may press Jog Dial instead of (VOL/PGM) in steps 4 and 6.
• To store a number to be dialed via PBX, follow the steps on page 20 when
entering a phone number.
Changing a stored name and/or phone
number
1 Display the name and phone number you want
to change by doing steps 1 and 2 on page 26.
2 Press Jog Dial.
Phone Directory (continued)
SONY
123456
7
SONY
1234567
DIAL PGM ERASE
1234567