Filter
Top Products
Basics
26
US
To
Adjust the speaker volume
Put a call on hold
Switch to another call
(“call waiting” service*)
Switch to tone dialing
temporarily
* You need to subscribe to the service from your telephone company.
Do this
During speakerphone conversation, press (VOL)
(+) or (--). Each press of (VOL)(+) or (--)
switches the speaker volume by one of 8 levels.
Press (HOLD). “HOLD” appears on the display.
Press (HOLD) again to resume the conversation.
Press (CALL WAITING/FLASH).
Press (CALL WAITING/FLASH) again to return to the
first caller.
Press (*TONE) after you’re connected.
The line will remain in tone dialing until
disconnected.
If you have a spare battery
You can replace the battery pack without disconnecting the call during
a conversation. To replace the battery pack, perform the following
procedure.
1 Press (HOLD) on the handset.
The call is on hold and “HOLD” appears on the display.
2 Replace the battery pack.
3 Press (HOLD) or (TALK) to resume the conversation.
Making calls through the speakerphone
Press (SPEAKERPHONE) on the base
phone.
“SPEAKERPHONE” appears on the
display and the display also shows the talk
time in hours, minutes and seconds.
The SPEAKERPHONE lamp lights up.
Dial the phone number.
When you’re done talking, press
(SPEAKERPHONE) again.
Making calls (continued)
(VOL)
SPEAKERPHONE lamp
(SPEAKERPHONE)
Additional tasks
(*TONE)
(HOLD)
(CALL WAITING/FLASH)
(REDIAL/PAUSE)