Filter
Top Products
158
Changing the digitizer preferences
The Digitizer Preferences screen opens the digitizer calibration screen.
This is the same screen that appears when you start your Sony handheld for
the first time.
You can recalibrate your screen after a hard reset, or if your digitizer drifts.
On the Preferences screen, select Digitizer from the
dropdown list in the upper right corner.
The Digitizer display alignment screen appears.
This screen is displayed also when you start up your Sony handheld for
the first time.
From the second time you use your Sony handheld, you can change the
digitizer preferences following the instructions appearing on the
screen.