Filter
Top Products
8 • Installation
[ SNOM 370 QUICK INSTALLATION V 1.0 ]
5
Insert the outside, rear snap-fi ts into the mounting
holes on the bottom shell (Fig. 5, arrow no. 1). Tilt the
footstand forward and downward until the snap-fi ts snap
into place in the mounting holes. Please, make sure
that the four snap-fi ts have securely snapped into
the holes before mounting the phone on the wall.
Fig. 5 Fig. 6
6
The slots on the footstand for the various cords can
also be used when the phone is mounted on a wall.
After connecting the phone (see chapter Setting up the
Phone, above), form the cords into loops and gently
press the long ends into the slots on the footstand. The
loops should not be too big, so that they will not hamper
the secure mounting of the phone on the wall, and not
too small, so that the cords will not be bent or broken
(Fig. 6).
The delivery includes a template to be used for marking the position
of the holes to be drilled in the wall.
(Use wall plugs, if necessary, and screws with half-round head
profi les (diameters of screws dmax = 4.5 mm (0.1755”), diameters
of heads dmax = 8.5 mm (0.3315”).
English
1
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030