Filter
Top Products
snom technology AG • 7
[ SNOM 370 QUICK INSTALLATION V 1.0 ]
1
keypad available for the snom 370, you must place phone and
keypad on an even, horizontal surface, as described above.
1
Turn the phone upside down (Fig. 3). Please, ensure that
you do not damage the display and/or its hinge and that
you do not drop the receiver. You may want to hold the
phone in your lap or have a second person hold it.
Fig. 3 Fig. 4
2
Lightly press the snap-fi ts of the footstand inwards
(Fig. 3) and, at the same time, tilt the footstand
backwards and lift it from its anchorage in the mounting
holes (Fig. 4).
3
Rotate the footstand 180° around its vertical axis.
4
Make sure that the handset cord has been clipped
correctly into the groove on the bottom shell of the
phone, as shown in Figs. 4 and 6. Failure to clip the
cord into the groove will result in damage to the cord
when the footstand is attached in the position for wall
mounting.
English
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030