Filter
Top Products
snom technology AG • 9
[ SNOM 360 QUICK INSTALLATION V1.00 ]
1
English
The screws must protrude approx. 0.5 cm (0.195”) from the wall
for easy wall mounting of the phone.
Adjusting the Handset Rest
The speaker of the handset has a small, rectangular indentation
that fi ts over the rounded end of the plastic tab inserted into a slot
on the top shell of the phone. When the phone is mounted on the
wall, the handset must be placed on this rounded end to ensure
that it will not fall off.
Slide the tab out of the slot, as shown in Fig. 7, rotate it 180°, and
slide it back into the slot, as shown in Fig. 8.
Fig. 7 Fig. 8
Adjusting the Position of the Display
The position of the snom360’s display is adjustable up to an angle
of 45° (Fig. 9 and 10).
Hold down the phone with one hand and adjust the display with
your other hand. Do not use too much force and do not pull,
wrench, or twist the display as this might damage or break the
hinges.