Filter
Top Products
8 • Installation
[ SNOM 360 QUICK INSTALLATION V1.00 ]
1
English
5
Insert the outside, rear snap-fi ts into the mounting
holes on the bottom shell (Fig 5, arrow no. 1). Tilt
the footstand forward and downward until the snap-fi ts
snap into place in the mounting holes. Please, make
sure that the four snap-fi ts have securely snapped
into the holes before mounting the phone on the
wall.
Fig. 5 Fig. 6
6
The slots on the footstand for the various cords can also
be used when the phone is mounted on a wall. After
connecting the phone (see chap. Setting up the Phone,
above), form the cords into loops and gently press the
long ends into the slots on the footstand. The loops
should not be too big, so that they will not hamper the
secure mounting of the phone on the wall, and not too
small, so that the cords will not be bent or broken (Fig.
6).
The delivery includes a template to be used for marking the position
of the holes to be drilled in the wall.
(Use wall plugs, if necessary, and screws with half-round head
profi les (diameters of screws dmax= 4.5 mm (0.1755”), diameters
of heads dmax=8.5 mm (0.3315”).