Filter
Top Products
Using the VMX 200-II
VMX 200-II | 15
Switching the VMX 200-II on/off
Switching the headset on
̈ Press and hold the multi-function button until the LED flashes blue
3 times. The voice prompt “power on” is announced in the headset.
When the headset is paired but not yet connected to the mobile phone,
the LED flashes 3 times blue every 5 seconds. Once the headset and the
mobile phone are connected, the LED goes off and the voice prompt
“connected” is announced in the headset.
Switching the headset off
̈ Press the multi-function button for 3 seconds.
The voice prompt “power off” is announced in the headset and the LED
flashes red 3 times. The headset switches off.
If the headset is switched off during an active call, the call will be trans-
fered to the mobile phone.
If the headset has not been used for more than 1 hour, it automatically
switches off to conserve battery power.
Connection profiles and volume settings are saved automatically
when the headset is switched off.
3 s
ON
”power on“
3 s
OFF
”Power off“