Filter
Top Products
34
SK 100 G2 / SK 300 G2 / SK 500 G2 bodypack transmitters
y
The prevention of improper charging of inserted primary cells
(batteries). Due to the missing sensor, individual rechargeable
battery cells will also not be charged in the L 2015 charger.
Connecting the microphone/line cable
The microphone/line input is designed for the connection of both
condenser microphones and instruments (e.g. guitars). DC power-
ing of the condenser microphones is via the microphone/line input.
̈ Connect the 3.5 mm jack plug ƹ from the microphone/line cable
to the 3.5 mm jack socket (MIC/LINE) ᕡ.
̈ Lock the 3.5 mm jack plug by screwing down the coupling
ring ƺ
̈ Via the operating menu, adjust the sensitivity of the micro-
phone/line input (MIC/LINE).
Attaching the microphones
̈ Use the microphone clips ƻ to attach the ME 2 or ME 4 clip-on
microphones to clothing (e.g. tie, lapel).
̈ Adjust the ME 3 headmic so that a comfortable and secure fit is
ensured.
Positioning the microphones
The ME 3 and ME 4 microphones are directional microphones, i.e.
their sound inlet should always be directed towards the sound
source (e.g. mouth).
The ME 2 with omni-directional pick-up pattern picks up sound
equally from all directions. It is the best choice if movements of the
speaker’s head have to be compensated for. However, it should be
attached as close as possible to the sound source.
Adjust the sensitivity correctly for all microphones/usages (see
”Adjusting the sensitivity“ on page 47).
Attaching the transmitter to clothing
The transmitter is attached to clothing (e.g. belt, waistband) with
the supplied belt clip.
The clip is detachable so that you can also attach the transmitter
with the antenna pointing downwards. To do so, withdraw the clip
from its fixing points and attach it the other way round.
The supplied BPP 1 bodypack pouch helps to protect the transmitter
against moisture.
³
ƺƹ
ƻ