Filter
Top Products
10
EK 1038 receiver
Indications
ቢ Alphanumeric display
ባ 4-step battery status display
ቤ Lock mode icon (lock mode is activated)
Operation and battery status indication
The red LED (LOW BAT/ON) ᕤ provides information on the current
operating state of the receiver:
Red LED lit up: The receiver is switched on and the capacity of the
batteries/rechargeable battery BA 2015 is suffi-
cient.
Red LED flashing:The batteries are/the rechargeable battery BA
2015 is going flat (LOW BAT)!
In addition, the 4-step battery status display ᕢ on the display
panel provides information on the remaining battery/rechargeable
battery BA 2015 capacity:
RF signal indication
The green LED (RF) ᕥ at the front of the receiver lights up when an
RF signal is being received.
However, the green LED (RF) does not light up when the audio out-
put is muted because the RF signal of the received transmitter is too
weak.
Display backlighting
After pressing a button, the display remains backlit for approx. 15
seconds.
ቢ
ባ ቤ
¿
ባ
3 segments: capacity approx. 100 %
2 segments: capacity approx. 70 %
1 segment: capacity approx. 30 %
Battery icon flashing: LOW BAT