Filter
Top Products
2 Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B
What you need
•
Straight-edge and Phillips screwdrivers
•
Four 6-32 UNC drive mounting screws
•
An ATA interface cable (max length: 18 inches) with
available 40-pin connector
•
An unused drive power cable for your new drive
Before you begin
•
Make sure your computer is turned off before you open the
case.
•
Read the handling precautions at the right and inspect the
drive to make sure that it is not damaged.
•
Save your foam-lined Seagate
disc drive box. This box has
been approved by Seagate for shipping a Seagate disc drive.
Using any other container or packing material voids your drive
warranty.