Filter
Top Products
Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B 23
Follow these instructions to remove a DDO from a drive.
1. Boot the computer to drive C.
2. Insert your DiscWizard diskette into drive A.
3. Type A:\DM to start Disk Manager.
4. Select the
Select Installation Options Menu.
5. Select
(M)aintenance Menu.
6. Select
(M)igrate Dynamic Drive.
This program moves the
data on your drive so that it can be accessed without the
DDO. The migration may take up to an hour to complete,
depending on the size of your drive.
7. When the migration program has finished, exit Disk
Manager.
8. Remove the diskette and reboot the computer. Enter your
system setup program (see your system manual for details).
9. Configure the hard drive with the Cylinder/Head/Sector
parameters.
10. When your computer has rebooted, insert the DiscWizard
diskette into drive A.
11. Type A:\DM and choose the
Maintenance Menu.
12. Select
Uninstall (D)isk Manager.
13. Select the correct drive to uninstall.
14. When the uninstall is complete, exit Disk Manager and
reboot.
Note. Disk Manager can also remove a drive overlay placed by
the EZ-Drive program. Select
(C)onvert Drive Format
from the Maintenance Menu.