Sanyo CLT-D6220 Cordless Telephone User Manual


 
13
14
Settings in the menu
You may set the following parameters using the display menu by pressing the button:
1.
2.
PHONEBOOK
SETUP
ADD
EDIT
DELETE
DELETE ALL
MUSIC GROUP
SPEED DIAL
MEMORY STATUS
UNIT NAME
BACKLIGHT TIME
AREA CODE
DIAL MODE
AUTO TALK
INPUT NAME
DEFAULT
VIP
FAMILY
FRIEND
COLLEAGUE
SELECT KEY
SECOND 5 - 20
TONE
PULSE
ON
OFF
MENU CHART
BASIC OPERATION (Continued)
Answering a call
1.
When a call comes in, the Incoming Ring LED, the indicator will flash. Dial buttons on
handset will light.
Press or .
(If the handset is on the base cradle, lift the handset from the base station and then press
or .
If the AUTO TALK is set to ON, simply lift the handset from the base to answer an incoming call.
2.
Press or place the handset back on the base station to hang up.
NOTE:
If the handset is too far away from the base station, pressing may not end the call and
an error beep sounds. In this case, move closer to the base station and press again.
Out of range
If you are too far away from the base and the call is cut, move closer to the base. Press
to search for the base. If successful you will hear a dial tone. Press to return to standby mode.
CHARGE
/IN USE
MENU
1
4
TONE
7
GHI
PQRS
0
2
3
5
6
9
8
ABC
DEF
JKL
MNO
TUV
WXYZ
BASIC OPERATION (Continued)
Placing a call
1.
2.
3.
Press or .
(if the handset is on the base cradle, lift the handset from the base and then press or ).
The dialing buttons will light. Length of time depends on the setting in the menu.
After you get the dial tone, dial the number.
The number you dialed will be shown in the display.
Press or place the handset back on the base station to hang up.
The indicator in the base station will light.
Or
You may pre-dial the number before you press or
1.
Dial the number.
The number you dialed will be shown in the display.
2.
Press or
3.
Press or place the handset back on the base station to hang up.
NOTE: If the handset is too far away from the base station, pressing may not place the call and
an error beep sounds. In this case, move closer to the base station and press again.
Set time
The handset has a date, time display. You may set the date and time before using the phone.
Before using the phone (continued)
Press To
enter MENU
scroll to SETUP
enter SETUP
scroll to SET TIME
enter SET TIME (the year will flash)
select year (or direct input the number using numeric keys)
confirm year (the month will flash)
select month (or direct input the number using numeric keys)
confirm month (the day will flash)
select day (or direct input the number using numeric keys)
confirm day (the hour will flash)
select hour (or direct input the number using numeric keys)
confirm hour (the minute will flash)
select minute (or direct input the number using numeric keys)
if time format is 12-hour, press to change AM/PM
confirm
exit
NOTE: You will need to set the date and time again after out of battery power or replacing the batteries.
If you have subscribed to Caller ID service, the date and time will be updated automatically when
received a call. However, it will not update the year.
MENU
MENU
MENU
MENU
MENU
MENU
MENU
MENU
CHARGE
/IN USE