Sanyo CLT-D6220 Cordless Telephone User Manual


 
17
18
FEATURES (Continued)
Flash
You can use the to access special services offered by your service provider or PBX, such as
call waiting.
The first caller is placed on hold, and you can talk to the second caller.
The second caller is placed on hold, and you can talk to the first caller.
If you subscribe to call waiting...
1.
2.
3.
If a call comes in when you are already on the phone, a beep sounds.
Press .
Press again.
NOTE:
When press the , the display will show "R".
The may also be used to get a new dial tone without pressing or replacing the handset
in the base station cradle. However, if your telephone line has special service features (such as call
waiting), the may not operate in this way.
Quick access for Missed call
In standby mode, press the to go into the MISSED CALL log. Press to review the calls.
Temporary touch-tone access
If you have a pulse dialing line, you can temporarily change to Touch-Tone dialing to access special
services such as electronic banking and remote-control answering machines.
1.
2.
3.
The telephone stays in tone mode until the call ends. Then it returns automatically to pulse mode.
Dial the number you want to call.
When your call is answered, press .
Follow the voice instructions to complete the service.
NOTE: When the telephone is in Pulse mode, press the # key will have no function.
TONE
TONE
NOTE: In order to show and store numbers in MISSED CALL, you must subscribe the Caller ID
by your service provider.
Press will review the last missed call. Press will review the first missed call.
Ringer mute
When the handset is off the cradle and the phone is ringing, you can temporarily mute the
incoming ring by pressing . The ringer will resume to ring when receiving the next incoming call.
FLASH
FLASH
FLASH
FLASH
FLASH
FLASH
FLASH
FEATURES (Continued)
To insert a pause :
You may insert a 3-second pause between two digits (for example, after 9 to get an outside line in a
PBX system).
Press after the digit.
To dial a number stored in the memory:
1.
2.
3.
Press .
Press to scroll to the location, or input the first letter of the desire name and then press
to go to the location start with the first letter.
Press or .
Your telephone will exit the memory mode and return to standby mode if:
If there is an incoming call while programing the memory, your telephone will exit the memory mode
and you will hear the ring. Press or to answer the call.
You do not press a key within 20 seconds
Press
Character Chart
Use this chart as a guide for entering characters.
1
0
1
.
/
_
2
A B C
3
D E F
4
G
H I
5
J
K L
6
M N O
7
P
Q
R
S
8
T U V
9
W X Y Z
enter a space
0 & % = < > £ $ ¥
,
'
"
?
!
(
)
@ : ;
2
ABC
5
JKL
8
TUV
7
PQRS
4
GHI
6
MNO
9
WXYZ
3
DEF
PAUSE
R
PAUSE
R
MENU
Redial
You can redial the dialed number using in the handset (up to 10 numbers).
NOTE:
To redial after hearing a busy signal, press , followed by , then .
If there is no number the display will show "EMPTY". The maximum redial number is 24 digits.
1.
2.
Press .
The display will show the last dialed number.
Press the button to scroll the previous dialed numbers.
Press or .
R
R
R
R
When you are reviewing a number in MISSED CALL, press or to dial number displayed.
Chain dialing
This feature allows you to dial phone numbers in the handset phonebook while you are on a call. This
feature can be used, for example, to dial a calling card access number or bank account PIN that you
have stored in the handset phonebook, without having to dial manually.
Press after you dialed the first number. Scroll and select the second number. Then press .
NOTE: Press to go back to the In Use screen when selecting the second number from the
phonebook. Press again to end the call.
For how to review the Call Log, please refer to page 32.