Filter
Top Products
Entering your area code
If you enter a 3-digit area code number in the
Area Code
option, your
local area code does not appear in Caller ID messages. Do not
program this option if your calling area requires 10-digit dialing.
When reviewing Caller ID messages, you will see only the local
seven digit number. For calls received from outside your local area
code, you will see a full 10-digit number.
1 When the phone is in standby mode,
press and hold the CID/MENU key. The
following screen appears.
2 Press the VOL/RING key twice to move
the pointer to ¨
Area Code
¨.
3 Press the SELECT/CH key.
4 Use the number (0 - 9) or DELETE/TRANS
key to enter the 3-digit area code.
5 Press the SELECT/CH key. A confirmation
tone sounds and the displayed area code is entered.
6 Press the END key or return the handset to the base unit or
charging cradle to complete the setting. The handset returns to
standby mode.
E14
GETTING
STARTED
When the area code has already been stored in
memory, the stored area code will be displayed.
To change it, use the DELETE/TRANS key and
number keys to enter the new area code.
Then press the SELECT/CH key. A confirmation tone sounds.
To complete the setting, press the END key or return the handset to the base
unit or charging cradle.
Note:
UP016DH(CLT5812) ENG OM 3/7/05 5:22 PM Page 14