Filter
Top Products
Section 14
98 Using the Voice Services of Your Sprint PCS Phone
Using Voice-Activated Dialing
Your phone features voice-activated dialing. You can call up to 10 stored
entries by speaking the individual’s or company’s name into the
microphone. Using the voice-activated dialing option requires that you
first program the phone to recognize the name of the individual or
company you are calling.
Tips on recording names
ᮣ Avoid recording similar names phonetically. If you record a name
similar to one that is already stored in a voice-dial memory, the
phone requests another name.
ᮣ Avoid recording in a noisy place.
ᮣ Speak clearly and naturally.
ᮣ Avoid very long or very short names. Names with two to five syllables
are recommended.
ᮣ If a voice dial entry does not properly connect, you may need to
record the name and number again.
Note: Record Voice Dial tags in a quiet environment and without the aid of
an accessory (for example, a headset or hands-free car kit).
Programming the Phone for Voice Dialing
Programming your phone for voice activated dialing is easy. The phone
provides voice prompts and screen displays to guide you through the
recording process. To program the phone for voice activated dialing:
1. From the Main Menu press for Voice Dial.
2. Press for Record. The phone will prompt you to say the name
you want to program.
3. Wait for the beep and then say the name. For best results, use names
with at least two syllables, or use both a first and last name. The
phone stores the name as a “first” sample, and then prompts you to
say the name again.
4. Respond to the prompt by repeating the name after the beep exactly
as you did the first time. The phone stores the name as a second
sample and then requests the phone number.
5. Enter the phone number on the keypad.