Filter
Top Products
Section 2
Getting to Know Your Sprint PCS Phone 23
Getting to Know
Your Phone
2
Note: Long backlight settings, searching for service, vibrate mode and
Browser use affect the battery’s talk and standby times.
Tip: Be sure to charge your phone’s battery and watch your indicator to
ensure your levels are okay.
Installing the Battery
Your Sprint PCS Phone comes with a LiIon battery. Follow these steps to
install it:
1. Place the battery on to the back of the phone, making sure that the
three plastic tabs line up with the corresponding holes on the phone.
2. Gently push the battery down on the phone until it snaps into place.
Removing the Battery
To remove your battery for charging or for another reason, follow these
easy steps:
1. Make sure the power is off by pressing and holding so you
don’t lose any stored numbers or messages.
2. Push up on the battery release latch and pull the battery away from
the latch.
3. Lift the battery away from the phone.