Samsung iDCS 16 Telephone User Manual


 
RECALL DIAL TONE
Hookflash and then dial 18 to disconnect your outside call and receive tele-
phone company dial tone for a new call.
BUSY LINE QUEUING WITH
CALLBACK
If you receive a busy signal when you select an outside line:
While on that call, hookflash, receive transfer tone and dial 44.
When the line becomes free, the system will call you back.
Lift the handset, receive dial tone and dial the telephone number or
the speed dial number again.
NOTE: A callback will be canceled if it is not answered within 30 seconds.
5
iDCS_16_SLT.qxd 12/14/2004 4:01 PM Page 9
6
INTERCOM CALLS
CALLING OTHER STATIONS
Lift the handset.
Dial the extension number or group number.
Wait for the party to answer.
If you hear several brief tone bursts instead of ringback tone, the sta-
tion you called is set for Voice Announce or Auto Answer.
Begin speaking immediately after the tone.
Finish the call by replacing the handset.
ANSWERING INTERCOM CALLS
Lift the handset and you are automatically connected to the ringing
call.
Finish the call by replacing the handset.
BUSY STATION CALLBACK
When you call another station and you receive a busy signal:
Hookflash, receive transfer tone, dial 44, receive transfer tone and
hang up.
When the busy station becomes free, your telephone will ring.
Lift the handset to automatically call the now idle station.
NOTE: You have 30 seconds to answer or the callback will be canceled.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal but you do not want
to wait for a callback:
Hookflash, receive transfer tone and dial 45.
The called station will receive off-hook ring or camp-on tone.
You will hear ringback tone.
Wait for the called party to answer.
The called station must release its first call or put it on hold before answer-
ing your camp-on.
iDCS_16_SLT.qxd 12/14/2004 4:01 PM Page 10