RCA RC926 Telephone Accessories User Manual


 
5
Unpacking
Carefully remove units from packaging. If there is any visible
damage,
DO NOT attempt to operate the equipment. Notify
your dealer or shipping carrier immediately. Keep this guide for
future use.
System Contents
• Base Unit
The base unit has two modular telephone
jacks on the right side, a recessed security
code button and a green indicator light.
• Extension Unit
The extension unit has one jack on the right
side, a recessed security code button and a
green indicator light. This is the unit that can
be moved from location to location to create
a phone jack in an electrical outlet.
Telephone Cord (6’)
A 6 ft. telephone cord is provided to connect
the base unit to the existing wall phone jack.
If this length is insufficient, a longer cord
may be purchased (ask for GE Phone Hook
Up product TP230).
Getting Started
Important Notes On Operation
Do not plug phone jacks into power strips or surge protectors.
Extension phone jack does not operate during a power outage.
Phone Jack System can only be used for one phone line.
Phone Jack System does not operate with caller ID Phones.
Be sure to plug Base unit (two jacks on side) in first before
Extension unit (one jack on side).
If you cannot get a dial tone, unplug both phone jacks and reset
units following the section titled “Trouble Shooting”on page 7.
It is very important that directions are followed in order. In the
event of a problem unplug both units, remove all cords and start
a g a i n .
926 Manual V2.0(1J9643) 6/10/99 1:39 PM Page 5