Filter
Top Products
4
FCC Part 68 & Class B Notices
Your wireless phone jack system complies with Part 68 of FCC Rules. You
must, upon request, provide the FCC registration number and the REN to
your telephone company. These numbers are shown on the label on the
base unit.
This equipment complies with the limits for a Class B digital device as speci-
fied in Part 15 of FCC Rules. These limits provide reasonable protection
against radio and TV interference in a residential area. However, your
equipment might cause TVor radio interference even when it is operating
properly. To eliminate interference you can try one or more of the following
corrective measures:
• Reorient or relocate the receiving antenna
• Increase the distance between the system and the radio or TV
• Use outlets on different electrical circuits for the equipment and the
radio or TV
Read the Troubleshooting section of this manual for directions on remedy-
ing the problem.
Lightning
Your wireless phone jack system has built-in protection circuits to reduce
the risk of damage from surges in telephone line. These protection circuits
meet or exceed the FCC requirements. However, lightning striking the tele-
phone or power lines can damage your system.
Lightning damage is not common. Nevertheless, if you live in an area that
has severe electrical storms, we suggest that you unplug the system during
storms to reduce the possibility of damage.
926 Manual V2.0(1J9643) 6/10/99 1:39 PM Page 4