Filter
Top Products
8. If registration fails, ensure that the base is still in registration mode (with the led blinking blue and amber)
and that the base and desk phone are in close proximity, then try again.
SIP account Configuration
The SIP account can be configured through IP DECT base web interface or desk phone menu.
Base Web interface
Retrieving the base IP address
In order to access the web interface of the base, the IP address is required. This information can be obtained
from a properly registered desk phone.
Press “OK” button to enter the main menu.
Using the up and down navigation buttons, highlight the icon “System” and then press the “Select” soft key.
Select the item “Network settings”.
Enter the Admin Password (Default password is “7227”) and then press the “OK” soft key.
Using the left and right navigation buttons, find the item “IP Address.” This shows the current IP address of
the base.
Inputting SIP account information via web interface
Open a web browser on a PC.
Enter the base IP address into the address bar and press “Enter”
A login window pops up. Enter the username and. The default username and passwords are “admin” and
“7227”.
The main page will load.
5