Filter
Top Products
27
T
ROUBLESHOOTING
G
UIDE
CORDLESS PHONE SOLUTIONS
Problem Solution
No dial tone • Check installation:
— Is the base power cord connected to a working outlet?
— Is the PHONE indicator on?
— Is the telephone line cord connected to the base unit
and the wall jack?
• Connect another phone to the same jack; the problem
might be your wiring or local service.
• Is the handset out of range of the base?
• Make sure the battery is properly charged (12 hours).
• Is the battery pack installed correctly?
• Did the handset beep when you pressed the PHONE
button? Did the PHONE indicator come on? The battery
may need to be charged.
• Place the handset in the base for at least 20 seconds.
Dial tone is OK, • Make sure the T/P switch on the base is correctly set.
but can’t dial out
Handset does not ring • Make sure the RINGER switch on the handset is turned to
ON.
• Move closer to the base. The handset may be out of range.
• You may have too many extension phones on your line. Try
unplugging some phones.
• Check for dial tone.
You experience static, • Change channels.
noise, or fading in and out • Move closer to base (handset might be out of range).
• Does the base need to be relocated? Make sure base is not
plugged into an outlet with another household appliance.
• Charge battery.