Filter
Top Products
Telephone Operation
Making Calls with the Corded Handset
1. Pick up the handset. The unit will automatically select the available line. If both lines are available, Line 1 will
be used rst.
-OR-
Press the Line1 or Line 2 button and then pick up the corded handset to select the desired line
2. Wait for a dial tone, and then dial a phone number using dial-pad, the directory or a one-touch speed dial.
3. Hang up the handset when nished.
Making Calls in Speakerphone Mode
1. Press the speaker button. The unit will automatically select the available line. If both lines are available, Line
1 will be used rst.
-OR-
Press either the Line 1 or Line 2 button to select the desired line, and the speakerphone will engage automati-
cally.
2. Wait for a dial tone, and then dial a phone number using dial-pad, the directory or a one-touch speed dial.
3. Press the speaker button again when nished.
Making Calls with the Optional Wired Headset
1. Plug the headset into the Headset jack on the side of the unit.
2. Adjust the headset to t comfortably, per the manufacturer’s instructions.
3. Press the headset button on the phone.
4. The phone will automatically select an available line. If both lines are available, Line 1 will be used rst.
5. Wait for a dial tone, and then dial the phone number using the dial-pad, the directory or a one-touch speed
dial.
NOTE: If the headset is not connected (or if not completely inserted into headset jack), an error
tone is heard when the Headset button is pressed.
NOTE: Headset performance may vary widely depending on the quality of the headset.
Pre-Dialing
1. With the phone idle, manually enter the telephone number.
2. Press the Speaker button or line1 or line 2 button to take a line, or pick up the corded handset (on the base
cradle) and then the telephone number will be dialed out.
NOTE: The maximum pre-dialing number length is 32 digits, if the number is over 32 digits, the
phone will emit an error tone.
16