Filter
Top Products
12
Use the DATA PORT jack to hook up your fax machine, for example, and then set the DATA
PORT switch to 2 in order to receive faxes on the phone number for line 2.
Connections and Setup
If you are talking to someone on line 2 and want them to fax something to you, change
the DATA PORT switch to 1 and give him the phone number for line 1. Your fax machine
can now receive calls on line 1.
IMPORTANT: Be sure to switch the fax machine back to the normal line when you are done because
outside callers who may not know that you have multiple lines will not be able to reach your fax
machine if they dial the normal fax line.
Wall Mounting the Phone
1. Remove the desktop stand from the base of the phone if it is already attached to the
base unit.
2. Thread the AC adaptor cord through the cord channel on the bottom of the phone.
3. Connect the line cord to the wall jack and the phone.
4. Slip the mounting circles on the bottom of the phone over the wall plate posts and
firmly slide the unit down into place.
5. Plug the AC adaptor cord into the power outlet.