Filter
Top Products
8
Follow these steps to install batteries in the alkaline battery
case.
1. If the alkaline battery case is connected to the walkie-
talkie, push the battery latch up and slide the battery case
off the walkie-talkie.
2. Using your thumb, press down on one of the arrow marks
on top of the battery case and pull it open.
3. Remove old batteries, if necessary, and install six fresh AA
alkaline batteries, according to the polarity marks (+ and –)
inside the battery case.
21-1672.fm Page 8 Thursday, August 5, 1999 12:04 PM