Filter
Top Products
26
Locking the Functions
Use the
LOCK
switch to lock the walkie-talkie’s functions (except
PTT
,
LGT
, and
H/L
) to prevent accidental program changes.
Press
LOCK
so
LOCK
appears on the display. To release the
lock, press
LOCK
again.
LOCK
disappears from the display.
POWER SAVER
Your walkie-talkie features a special power saver circuit. If the
walkie-talkie does not receive a transmission for more than 10
seconds, the circuit sets the walkie-talkie to standby and
PS
flashes on the display.
During standby, the walkie-talkie uses only 70% of the power
consumed during regular operation. The walkie-talkie returns to
normal power when it receives a transmission, when you turn
SQUELCH
counterclockwise until you hear noise, or when you
press any control or function switch.
21-1672.fm Page 26 Thursday, August 5, 1999 12:04 PM