Filter
Top Products
14
3. Insert the cigarette lighter plug into your vehicle’s cigarette
lighter socket.
Note: If the walkie-talkie does not operate properly when
you use the DC car adapter, unplug the cord from the
lighter socket and clean any ashes or other debris from the
socket. If it still does not operate properly, check the fuse in
the DC car adapter plug (see “Replacing the DC Car
Adapter Fuse” on Page 34).
4. To connect an external, mounted antenna using the DC car
adapter, attach the female antenna connector on the DC
car adapter to a male antenna connector on the external,
mounted antenna cable.
Then disconnect the antenna connected to the antenna
jack on the walkie-talkie.
5. When you finish using the DC car adapter, disconnect it
from the cigarette lighter socket. Then disconnect the
adapter cord from your walkie-talkie. Reconnect the sup-
plied antenna to the antenna jack on the walkie-talkie.
21-1672.fm Page 14 Thursday, August 5, 1999 12:04 PM