Filter
Top Products
22
TROUBLESHOOTING
If you have problems using your TAD, try these suggestions. If you still have prob-
lems, contact your local RadioShack store for assistance.
Problem Su
gg
estion
The incoming message is
incomplete.
Be sure the memory is not full.
The caller’s message was longer than 60 sec-
onds.
The caller was silent for more than 8 seconds.
The incoming message is
unclear.
Adjust
VOLUME
.
The TAD does not answer after
four or seven rings.
Be sure the TAD is set to answer calls.
ANSWER
indicator flashes. The backup battery is weak or missing.
Replace the battery (see “Installing a Backup
Battery” on Page 6).
The TAD does not respond to
the remote operation security
code.
Make sure the phone you used to dial the TAD
is a touch-tone phone. (If it is not, you can use
a pocket tone-dialer to enter the code and com-
mands.)
Re-enter your remote operation security code.
Press each button for about 2 seconds to be
sure the touch-tone signals are clear enough.
The remote operation security code might have
reset to the default code due to a power failure.
Try using
764
.
You cannot record an incoming
message.
Be sure the TAD is set to answer calls.
Be sure the memory is not full.
43-764.fm Page 22 Friday, August 13, 1999 2:43 PM