Filter
Top Products
14
TELEPHONE
SETTING THE HANDSET
VOLUME
The handset’s volume control lets you
adjust the sound you hear through the
handset.
To increase or decrease the volume,
roll the handset’s volume control up or
down.
USING REDIAL
You can quickly dial the last number di-
aled. When you hear a dial tone, press
REDIAL
.
Note
: The redial memory holds up to 31
tone digits or 32 pulse digits, and lets
you redial long distance or local num-
bers.
USING RESET
To disconnect a call without hanging up
the phone, hold down
RESET
for about
1 second. When you release it and hear
a dial tone, dial again.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by following
these steps.
1. With
TONE/PULSE
set to
PULSE
,
dial the service’s main number.
2. When the service answers, set
TONE/PULSE
to
TONE
. Any addi-
tional numbers you dial are sent as
tone signals.
3. After you complete the call, set
TONE/PULSE
back to
PULSE
and
hang up the phone.
Illus. showing the
handset volume con-
Illus. showing the
REDIAL
button.
Illus. showing
RESET
button.
43-764.fm Page 14 Friday, August 13, 1999 2:43 PM