Filter
Top Products
11
TELEPHONE OPERATION
Place and answer phone calls with the
TAD-759 as you would with any stan-
dard phone.
SETTING THE RINGER’S
VOLUME
To change the ringer’s volume, set the
ringer volume switch on the back of the
base to
LO
for a normal ringer volume,
or
HI
for a louder ring.
If you do not want the ringer to sound,
set the ringer volume switch to
OFF
. You
can still make calls with the ringer off,
and you can answer calls if you hear an-
other phone on the same line ring.
USING REDIAL
To quickly dial the last number dialed, lift
the handset and press
REDIAL
.
Note: The redial memory stores 31 tone
digits or 32 pulse digits.
ADJUSTING THE
HANDSET’S VOLUME
The TAD-759 has three volume levels.
To adjust the volume you hear through
the handset, slide
HANDSET VOLUME HI/
MED/LO
to the desired volume during a
call.
USING FLASH
Use
FLASH
to perform the switchhook
operation for special services, such as
Call Waiting.
For example, if you have Call Waiting,
press
FLASH
to take an incoming call
without disconnecting the current call.
Press
FLASH
again to return to the first
call.
Note: If you do not have special phone
services, pressing
FLASH
might discon-
nect the current call.