Filter
Top Products
3
To take advantage of all the TAD-1027’s
features, we recommend that you read
this manual completely before you use
the TAD.
This TAD has been tested and certified
to comply with all applicable UL and FCC
standards.
This symbol is intended to alert you to
the presence of uninsulated danger-
ous voltage within the product’s enclo-
sure that might be of sufficient
magnitude to constitute a risk of elec-
tric shock. Do not open the product’s
case.
This symbol is intended to inform you
that important operating and mainte-
nance instructions are included in the
literature accompanying this product.
READ THIS BEFORE
INSTALLATION
Your TAD-1027 conforms to federal reg-
ulations, and you can connect it to most
telephone lines. However, each device
you connect to the phone line draws
power from the phone line. We refer to
this power draw as the device’s
ringer
equivalence number
, or REN. The REN
is on the label on the bottom of the TAD.
If you are using more than one phone or
other device on the line, add up all the
RENs. If the total is more than five (or
three in rural areas), your phone(s) might
not ring and your TAD might not answer.
If ringer operation is impaired, remove a
device from the line.
FCC STATEMENT
Your TAD-1027 complies with Part 68 of
FCC Rules
. You must, upon request,
provide the FCC Registration Number
and the REN to your phone company.
Both numbers are on the label on the
bottom of the TAD.
You must not connect the TAD-1027 to
any of the following:
• Coin-operated systems
• Party-line systems
• Most electronic key phone systems
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION
: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
WARNING
: To reduce the risk of
fire or shock hazard, do not ex-
pose this product to rain or mois-
ture.
CAUTION
!
!
43-787.fm Page 3 Monday, August 16, 1999 8:11 AM