Filter
Top Products
20
Note:
Each tone or pause entry
uses one digit of memory.
4. Press
MEM
again, then enter the
memory location number (
0
–
9
)
where you want to store the number.
A tone sounds to indicate that the
number is stored.
Note:
If the phone sounds five quick
beeps, you have made an entry error,
and the number was not stored. Start
again.
To replace a stored number, store a new
number in its place. To erase a number
from a memory location, press
MEM
twice. Then press the memory location
number (
0
–
9
) you want to clear. A tone
sounds.
Entering a Pause
In some telephone systems, you must
dial an access code (9, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
a pause after the access code to allow
the outside line time to connect.
To enter a 2-second pause, press
REDI-
AL/PAUSE
(
REDIAL
on the handset).
Press
REDIAL/PAUSE
or
REDIAL
repeat-
edly for a longer pause.
Dialing a Memory Number
To dial a number stored in the handset’s
memory, lift the handset from the base
and press either line button. When you
hear a dial tone, press
MEM
and enter
the memory location number for the
number you want to dial.
To dial a number stored in the base’s
memory, press either line button. When
you hear a dial tone, press
MEM
and en-
ter the memory location number for the
number you want to dial.
Note:
If you select an empty memory lo-
cation, the base beeps 5 times.
Chain-Dialing Service Numbers
For quick recall of numbers for special
services (such as alternate long dis-
tance or bank by phone), store each
group of numbers in its own memory lo-
cation.
To use the stored special service num-
bers, dial the service’s main number
first. Then, at the appropriate place in
the call, press
MEM
and the number for
the memory location where the addition-
al information is stored.
Testing Stored Emergency
Numbers
If you store an emergency service’s
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.
43-686.fm Page 20 Friday, September 10, 1999 3:13 PM