Filter
Top Products
14
7. When you finish storing numbers in
memory, set
NORM/STORE
to
NORM
.
For each stored number, write the name
of the person or company on the memo-
ry index. Use a paper clip to lift off the in-
dex’s plastic cover. Replace the cover.
To replace a stored number, just store a
new one in its place.
Entering a Pause
In some telephone systems, you must
dial an access code (9, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
a pause after the access code to allow
the outside line time to connect.
To enter a 4-second pause while storing
a phone number, press
PAUSE
.
You can
add more pause entries for a longer
pause.
Dialing a Memory Number
1. Press
LINE 1
or
LINE 2
.
2. Lift the handset or press
SPEAKER
.
3. Press
MEMORY
.
4. Enter the memory location number
(01–20) for the telephone number
you want to dial.
Chain-Dialing Service Numbers
For quick recall of numbers for special
services, store each group of numbers
in its own memory location.
When calling special services (such as
alternate long distance or bank-by-
phone), dial the service’s main number
first. Then, at the appropriate place in
the call, press
MEMORY
and enter the
number for the location where the addi-
tional information is stored.
Note:
You cannot store if you have
pulse dialing.
VOLUME
MIN
MAX
LINE 1- RINGER - LINE2
OFFLO HI
OFFLO HI
MODE
PULSE - TONE
NORM - STORE
VOLUME
MIN
MAX
LINE 1- RINGER - LINE 2
OFFLO HI
OFFLO HI
MODE
PULSE - TONE
NORM - STORE
43-652.fm Page 14 Friday, August 13, 1999 11:00 AM