Filter
Top Products
11
To make or answer a call, press
TALK
so the
TALK
key on the handset lights.
Notes:
• If the phone is out of range of the
base, the handset beeps three
times and the
TALK
key turns off.
• You can make or answer a call on
a phone on the same line as the
cordless phone, even if the ET-
545’s handset is away from the
base.
• The keypad on the handset turns
off if no button is pressed for more
than 10 seconds (but the
TALK
key remains lit).
To disconnect a call, press
TALK
so
the
TALK
key turns off.
REDUCING
INTERFERENCE
The ET-545 automatically selects a
clear channel at the start of each call.
CH
and the current channel number
appear on the display whenever
TALK
is lit. Sometimes, however, the select-
ed channel picks up interference dur-
ing a call. To reduce interference
during a call, press
CH
to switch to an-
other channel (25 in all) until you re-
ceive better reception.
USING REDIAL
To quickly redial the last number di-
aled, simply lift the handset and press
TALK
, then press
REDIAL/PAUSE
. The
redialed number appears on the dis-
play and the phone dials it.
Notes:
• The redial memory holds up to 80
digits.
• We recommend you not use
REDIAL/PAUSE
to dial numbers
that include a tone entry (see
“Using Tone Services on a Pulse
Line” on Page 12).
• The redial memory does not store
a
FLASH/DEL
entry or any digits
entered after you press
FLASH/
DEL
.
illus
illus
43-1045.fm Page 11 Tuesday, August 17, 1999 10:58 AM