Filter
Top Products
14
Operation
Press
FUNC
three times to dial the long
distance prefix and local number (1-555-
1212).
Press
FUNC
four times to dial the area
code and local number (604-555-1212).
4. Press
REDIAL/CALL
BACK
. The system
dials the caller’s phone number.
Storing a Caller ID Record in
Memory
1. Make sure the CHARGE/IN USE/MES-
SAGE indicator is not lit.
2. Press
CID/VOL
8
88
8
or
9
99
9
to find the
desired caller ID record. The caller ID
memory shows the phone number with
area code.
3. Press
FUNC
to store the number as
specified in Step 3 of “Dialing a Number
from a Caller ID Record.”
4. Press
MEM
once.
SELECT
MEMO
0-9?
appears.
5. Enter the memory location number. The
handset sounds two long beeps.
Notes:
• If the handset sounds three short beeps,
the caller’s number is not stored. Start
again from Step 1.
• You cannot store a Caller ID record with-
out the caller’s number or name in the
phone’s memory.
Deleting Caller ID Records
1. Make sure the CHARGE/IN USE/MES-
SAGE indicator is not lit.
2. To delete a single record, repeatedly
press
VOL/CID
8
88
8
or
9
99
9
to find the
desired number, then press
FLASH/
DELETE
.
ERASE
CALL
ID?
appears.
To delete all records, hold down
FLASH/
DELETE
for 3 seconds.
ERASE
ALL?
appears.
3. Press
FLASH/DELETE
again to confirm
the deletion. The handset sounds two
long beeps and the selected number is
deleted.
Or, press any button other than
FLASH/
DELETE
to cancel the deletion. The
handset sound three short beeps.