Radio Shack ET-1106 Cordless Telephone User Manual


 
28
Operation
CALLER ID OPERATION
If you subscribe to Caller ID service from your phone company,
the system automatically displays information about calls you
receive and stores the information in Caller ID memory. The
system can store up to 50 number records (the most recent is
01), then replaces the oldest call with each new one.
The first line of the Caller ID record shows the caller’s name.
The second line shows the phone number of the caller and oth-
er information about the call (see “Caller ID Messages” on
Page 29).
Note:
If you are programming the system when a call is re-
ceived, the phone automatically exits programming and shows
Caller ID information.
The CHARGING/IN USE indicator on the base flashes during
an incoming call and
INCOMING
CALL
appears on the hand-
set display. The NEW CALL indicator on the base flashes when
Caller ID information is received. The latest Caller ID record or
a repeat call from the same number appears on the handset
display when the phone rings, then
#
NEW
CALLS
remains dis-
played after the last incoming call.
CHECK
TEL
LINE
The telephone line is not connected
securely.
RINGER
OFF
Appears when the user has set the
ring type to
OFF
.
Display Description
43-1106.fm Page 28 Wednesday, April 26, 2000 10:30 AM