Filter
Top Products
21
Operation
USING TONE SERVICES ON A PULSE LINE
If you have pulse service, you can still use special services that
require tone signals, such as bank-by-phone, by following these
steps.
1. Be sure the dial type is set to pulse.
2. Dial the service’s main number.
3. When the service answers, press on the keypad. Then
dial the additional numbers. The phone sends these num-
bers as tone signals.
4. When you complete the call, place the handset on the base
or press
OFF
to disconnect the call. The phone automati-
cally resets to pulse dialing.
USING PAGE
PAGE
allows you to send a page from the base to the handset,
so you can page someone at the handset or locate the handset
if you misplaced it.
Press
PAGE
on the base. The handset rings and
BASE
PAG-
ING
HANDSET
appears on the display. Press any key on the
handset or press
PAGE
on the base once to stop the ringing.
MEMORY DIALING
You can store up to 20 phone numbers in memory and dial any
stored number conveniently. Each stored number can contain
up to 20 digits.
43-1106.fm Page 21 Wednesday, April 26, 2000 10:30 AM