Filter
Top Products
9
6. Plug the adapter into a standard AC
outlet.
7. Raise the base’s antenna to a verti-
cal position.
CONNECTING AND
CHARGING THE BATTERY
PACK
The ET-1105 comes with a rechargeable
nickel-cadmium battery pack in the
handset but not connected. Before using
your phone, you must connect the bat-
tery pack and then charge it for about 16
hours.
1. Press down and slide off the com-
partment cover as shown.
2. Plug the battery pack’s connector
into the socket in the compartment.
The connector fits only one way.
Note:
For easier battery pack con-
nection, lift it out of the compart-
ment, insert its connector into the
socket, then replace the battery
pack inside the compartment.
3. Replace the cover.
To charge the battery pack, place the
handset on the base. The CHARGE indi-
cator on the base lights.
Recharge the battery pack when
and
LOW BATTERY appear on the
handset’s display.
43-1105.fm Page 9 Monday, August 30, 1999 1:57 PM