Filter
Top Products
14
TELEPHONE OPERATION
MAKING AND RECEIVING
A CALL
To make a call, lift the handset and
press
TALK. PHONE displays. When the
TALK indicator lights steadily and you
hear the dial tone, dial the desired phone
number or memory number (see “Memo-
ry Dialing” on Page 15).
The ET-1105 displays the phone number
as you dial. Then
PHONE disappears,
the duration of your call (after 14 sec-
onds) in minutes and seconds displays.
To answer a call if the handset is on the
base, lift the handset and press
TALK.
Or, if the handset is away from the base,
press any key on the handset before
speaking. The TALK indicator on the
handset lights and the IN USE indicator
on the base flashes.
To end a call, place the handset on the
base or press
TALK. The TALK and IN
USE indicators turn off.
Notes
:
• If you press
TALK to hang up and
the phone does not disconnect,
move closer to the base then press
TALK again, or place the handset on
the base.
• If you hear loud static during a con-
versation, move the handset closer
to the base.
•
OUT OF RANGE appears when the
distance from the handset to the
base is out of the phone’s range.
SETTING THE HANDSET’S
VOL UME
You can select any of four different vol-
ume settings by repeatedly pressing
VOLUME during a call.
USING REDIAL
You can quickly redial the last number di-
aled. Lift the handset and press
TALK.
When you hear the dial tone, press
REDI-
AL
. The number appears on the display
as the phone dials it.
Notes:
• The redial memory holds up to 32
digits, so you can redial long-
distance as well as local numbers.
VOLUME
REDIAL
43-1105.fm Page 14 Monday, August 30, 1999 1:57 PM