Filter
Top Products
9
Preparation
When the MESSAGE indicator lights continuously, the system
is ready to answer calls.
To turn off the system, press
STOP/ON/OFF
. The MESSAGE
indicator turns off and the system beeps.
You can also turn on the system remotely (see “Setting the
System to Answer Calls” on Page 12).
ADJUSTING THE VOLUME
Press or hold down
VOLUME
8
88
8
to increase or
VOLUME
9
99
9
to
decrease the volume. The system beeps when you press either
volume button so you can hear the volume level as it changes.
SETTING THE DAY AND TIME
You must set the day and time before the system will record the
day/time voice stamp on each memo and incoming message.
The day/time voice stamp automatically defaults to Monday,
12:00 AM, when you connect the system to power, and does
not advance until you set the correct day and time.
1. Hold down
TIME/SKIP
(a tone sounds) continuously through
Step 4.
2. Repeatedly press
DAY/REPEAT
until the system announces
the correct day.
3. Repeatedly press
HOUR/ANNOUNCE
until you hear the
correct hour.
43-3801a.fm Page 9 Monday, February 25, 2002 8:56 AM