Filter
Top Products
23
Caller ID Operation
REVIEWING CALLER ID
RECORDS
(Handset Only)
To review the Caller ID records in the hand-
set's memory, lift the handset and press CID.
The number of new Caller ID records, if any,
and the total number of records appears.
Note:
If the handset is faceup on the base, it
shows the number of Caller ID records, so
you can see if you have new records to re-
view.
Repeatedly press
VOL/CID
9
99
9
to scroll
through the Caller ID records from the new-
est to the oldest, or
VOL/CID
8
88
8
to scroll back
through the records. To scroll quickly through
the records, hold down
VOL/CID
8
88
8
or
9
99
9
.
When you scroll past the last record, total
record number appears, then the first record.
When you scroll past the first record, the total
record number appears, then the last record.
The top line of each record shows the date,
time and the number of calls from that num-
ber. The second line shows the caller's
name, and the third line shows the caller's
phone number.
Note:
Calls cannot be reviewed or stored in
the base.
Caller ID Messages
ADDING/DELETING THE
AREA CODE
(Handset Only)
When the area code of the received call is
the same as the one you stored (see “Storing
Your Area Code” on Page 13), the caller ID
record does not show the area code. If it is
different, the record shows the area code.
However, you can add or delete the area
code on the display. When the record is on
the display, press
3
to add or delete the area
code. Pressing
3
again deletes or adds the
area code.
When you dial the number or store it into
memory, the phone dials or stores the num-
ber as it appears on the display.
DIALING NUMBERS FROM A
CALLER ID RECORD
(Handset Only)
To dial a local number stored in a Caller ID
record, recall the record, then press
TALK
. If
it is a long distance call, press
1
(
'
''
'
appears
before the displayed number) before you
press
TALK
. If you want to add or delete the
area code, press
3
before you press
TALK
.
Display Description
D[m0ýNN
D[m0ýNND[m0ýNN
D[m0ýNN
JejWb0ýNN
JejWb0ýNNJejWb0ýNN
JejWb0ýNN
Shows the number of new
Caller ID records ( records
you have not reviewed) and
the total number of records.
Fh_lWj[
Fh_lWj[Fh_lWj[
Fh_lWj[
DWc[
DWc[DWc[
DWc[
or
Fh_lWj[
Fh_lWj[Fh_lWj[
Fh_lWj[
DkcX[h
DkcX[hDkcX[h
DkcX[h
The caller has blocked the
Caller ID information from
being sent.
KdademdýDWc[
KdademdýDWc[KdademdýDWc[
KdademdýDWc[
or
Kdademd
KdademdKdademd
Kdademd
DkcX[h
DkcX[hDkcX[h
DkcX[h
The caller is not within a
Caller ID service area.
?dYecfb[j[
?dYecfb[j[?dYecfb[j[
?dYecfb[j[
:WjW
:WjW:WjW
:WjW
Appears if there was an
error during the transmis-
sion of Caller ID informa-
tion. Minor electrical
disturbances can affect
Caller ID information. Occa-
sional errors are normal. If
the phone frequently dis-
plays
?dYecfb[j[
?dYecfb[j[?dYecfb[j[
?dYecfb[j[
:WjW
:WjW:WjW
:WjW
, con-
tact your local telephone
company or RadioShack
store for assistance.
Display Description