Radio Shack 43-1122 Cordless Telephone User Manual


 
2
Important Information
ˆ
Important Information
This telephone has been tested and found to
comply with all applicable UL and FCC
standards.
We have designed your 900MHz Cordless
Phone with Call Waiting/Caller ID to conform
to federal regulations, and you can connect it
to most telephone lines. However, each
device, such as a telephone or answering
machine, that you connect to the telephone
line draws power from the telephone line. We
refer to this power draw as the device's
ringer equivalence number, or REN. The
REN is on the bottom of your phone.
If you use more than one phone or other
device on the line, add up all of the RENs. If
the total is more than five (three in rural
areas), your telephones might not ring. If
ringer operation is impaired, remove a device
from the line.
FCC STATEMENT
Your telephone complies with Part 68 of FCC
Rules. You must, upon request, provide the
FCC registration number and the REN to
your telephone company. Both numbers are
on the bottom of your telephone.
Note:
You must not connect your telephone
to:
coin-operated systems
party-line systems
most electronic key telephone systems
THE FCC WANTS YOU TO
KNOW
In the unlikely event that your phone causes
problems on the phone line, the phone
company can temporarily discontinue your
service. If this happens, the phone company
attempts to notify you in advance. If advance
notice is not practical, the phone company
notifies you as soon as possible and advises
you of your right to file a complaint with the
FCC.
Also, the phone company can make changes
to its lines, equipment, operations, or
procedures that could affect the operation of
this telephone. The telephone company
notifies you of these changes in advance, so
WARNING:
To reduce the risk of fire or
shock hazard, do not expose this product
to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
This symbol is intended to alert
you to the presence of uninsu-
lated dangerous voltage within
the product’s enclosure that might
be of sufficient magnitude to con-
stitute a risk of electric shock. Do
not open the product’s case.
This symbol is intended to inform
you that important operating and
maintenance instructions are
included in the literature accom-
panying this product.
!
!
©
2001 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.