Filter
Top Products
27Remote Operation
• When the phone is operating from a remote location, it stops all answering func-
tions and
rC
appears on the display on the base. The phone resumes answering
functions when it is no longer in remote operation, if you have not turned it off.
• The remote playback of incoming messages is limited to 4 minutes. If you have
more messages after 4 minutes have passed, you must press
# 2
again to listen
to the rest of the messages.
• When using remote operation, you can only delete the current message during
playback. You cannot delete all the messages stored at one time.
The following table shows the remote commands you can use.
Note:
Remote operation stops when someone picks up the handset and presses ei-
ther
LINE 1
or
LINE 2
(whichever is flashing), or any phone on the same phone line.
Remote Commands
Press #
then (within
2 seconds:
Function
1
Repeat current message during playback.
2
Play messages.
3
Skip current message during playback.
4
Delete current message during playback.
5
Stop playback, recording, and room monitoring.
6
Set the phone to answer or not answer calls.
7
Record or stop recording a new outgoing message.
8
Play the outgoing message.
9
Switch to the other line (Line 1 or Line 2).
0
Monitor the room where the phone is located for 15 seconds.