Filter
Top Products
49
Beyond the Basics
Adjusting the Ringer, Earpiece and
Speaker Volume
Adjusting the Ringer Volume
You can choose from three ringer volume settings on the handset
and the base (off, low, high). With the phone in standby, use or
on the four-way function key to adjust the ringer volume.
Adjusting the Speaker Volume
Ear speaker: You can choose from six volume levels for the
earpiece speaker. To adjust the earpiece volume while on a call,
press (to make it louder) or (to make it softer).
Speaker: You can choose from six volume levels for the handset
speakerphone and ten volume levels for the base speakerphone.
To adjust the speaker volume while on a call, press (to make it
louder) or (to make it softer).
T-coil (Handset only)
Digital spread spectrum cordless phones generate magnetic
signals that could cause noise to be heard by users wearing
hearing aids set to “T” mode. (The “T” mode is only found on
hearing aids equipped with a telecoil (“T” coil) feature). This
phone includes a special “T-coil” mode that, when activated,
reduces the magnetic noise generated by the handset.
To activate the “T-coil” mode perform the following steps on your
handset:
While on a call:
Press and hold MUTE for at least 5 seconds or until a beep
tone is heard.
The “T-coil” mode icon will appear on the handset LCD
display.
The handset will remain in “T-coil” mode for all future calls or
until the “T-coil” mode is turned off.
1.
2.