Filter
Top Products
4
Introduction
4. Exercise care in handling the battery pack in order not
to short it with conducting materials such as rings,
bracelets, and keys. The battery or conductor may
overheat and cause burns.
5. Charge the battery pack provided or identified for use
with this product only in accordance with the
instructions and limitations specified in the instruction
manual provided for this product.
6. Observe proper polarity orientation between the battery
pack and battery charger.
5#8'"6*'5'"+05647%6+105
+0641&7%6+10
Thank you for purchasing the RadioShack 900 MHz Cord-
less Telephone. Your phone uses the 900 MHz band for less
interference, clearer sound, and greater range than 46/49
MHz cordless telephones. Its headset jack means you can
connect an optional headset for hands-free convenience.
#
+056#..#6+10
You can place the phone on a desk or table, or mount it on a
standard wall plate or directly on a wall. Select a location
that is:
• near an accessible AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery, electrical appliances,
metal walls or filing cabinets, wireless intercoms,
alarms, and room monitors
• away from other cordless phones
The base’s location affects the handset’s range. If you have
a choice of several locations, try each to see which provides
the best performance.
.
Your telephone connects directly to a modular telephone
line jack. If your telephone wiring does not have a modular
jack, you can update the wiring yourself using jacks and
adapters (available at your local RadioShack store or online
at RadioShack.com), or have the telephone company
update the wiring for you. You must use compatible modular
jacks that are compliant with Part 68 of
FCC Rules
. The
USOC number of the jack to be installed is RJ11C (or
RJ11W for a wall plate jack).
#
"+/2146#06"
#
• Cordless phones such as this
one require AC power to
operate. When the power is off,
you cannot make or receive
calls using your phone. To be
safe, you should also have a
phone that does not need AC
power to operate (not a cord-
less phone), so you can still
make and receive calls if there
is an AC power failure.
• When AC power is lost, the
phone loses the security
access-protection code con-
nection between the base and
the handset. When power is
restored, put the handset on
the base briefly to restore this
connection so you can use the
handset.
• Your phone operates on
standard radio frequencies as
allocated by the FCC. It is
possible for other radio units
operating nearby on similar
frequencies to unintentionally
intercept your conversation or
cause interference. This
possible lack of privacy can
occur with any cordless phone.
.
"%#76+10"
.
You must use a Class 2
power source that
supplies 9V DC and
delivers at least 210 mA. Its center
tip must be set to positive and its
plug must fit the phone's
DC IN 9V
jack. The supplied adapter meets
these specifications. Using an
adapter that does not meet these
specifications could damage the
phone or the adapter.
• Always connect the AC adapter
to the phone before you connect it
to AC power. When you finish,
disconnect the adapter from AC
power before you disconnect it
from the phone.
!
43-3533.fm Page 4 Friday, June 28, 2002 2:36 PM