Filter
Top Products
9
Preparation
TURNING THE SYSTEM ON/OFF
To turn on the system, press
ON/OFF/STOP
. The display lights
and the system sounds a tone. The system is set to answer
calls.
To turn it off, press
ON/OFF/STOP
. The display turns off and the
system sounds 2 tones.
ADJUSTING THE VOLUME
Push down or pull up
VOLUME
8
88
8
/
9
99
9
to increase or decrease
the volume. The system sounds a tone when you change the
volume.
SETTING THE DAY AND TIME
The day/time voice stamp automatically defaults to Monday,
12:00 AM when you connect the system to power.
Note:
Hold down
SKIP/TIME SET/CHECK
continuously for Steps
1–4.
1. Turn on the system. Hold down
SKIP/TIME
SET/CHECK.
The
system sounds a tone after 1 second.
2. While holding down
SKIP/TIME SET/CHECK
, press
REPEAT/
ANNC/DAY
. The system announces “Monday” and
01
appears on the display. Repeatedly press
REPEAT/ANNC/
DAY
until you hear or see the correct day.
3. While holding down
SKIP/TIME SET/CHECK,
press
MEMO/2
WAY/HOUR
. The system announces “1 AM”.
01
appears on