Filter
Top Products
Installation
9
4. Plug the adapter into a standard AC
outlet. And plug the modular cord’s
other end into a modular phone line
jack.
5. For a wall plate,
align the base’s
keyhole slots with
the wall plate
studs and slide the
base downward to
secure it.
For direct wall
mounting, align
the base’s
keyhole slots
with the
mounting
screws and slide
the base
downward to secure it.
C
ONNECTING
/C
HARGING
THE
B
ATTERY
P
ACK
The phone comes with a rechargeable
nickel-cadmium battery pack in the handset,
but not connected. Before using your
phone, you must connect the battery pack.
Then charge it for about 15–20 hours.
!
1. Press down and slide off the battery
compartment cover.
2. Lift the battery pack out of the
compartment.
3. Plug the battery pack’s connector into
the socket in the compartment (the
connector fits only one way). Then
place the battery pack in the
compartment.
TEL LINEDC IN 9V
!
IMPORTANT
!
The EPA
certified
RBRC
®
Battery
Recycling Seal
on the nickel-
cadmium (Ni-Cd) battery
indicates RadioShack is
voluntarily participating in
an industry program to
collect and recycle these
batteries at the end of their
useful life, when taken out
of service in the United
States or Canada. The
RBRC program provides a
convenient alternative to
placing used Ni-Cd
batteries into the trash or
the municipal waste
stream, which may be
illegal in your area. Please
call 1-800-THE-SHACK (1-
800-843-7422) for
information on Ni-Cd
battery recycling and
disposal bans/restrictions
in your area. RadioShack’s
involvement in this
program is part of the
company’s commitment to
preserving our
environment and
conserving our natural
resources.
43-3549.fm Page 9 Tuesday, May 25, 2004 2:15 PM