Filter
Top Products
18
If you still have problems, disconnect the phone. If other phones on the same line
work properly, the fault is in this phone or its installation. If you cannot find the prob-
lem, take your phone to your local RadioShack store for assistance.
Handset does not rin
g
or receive a pa
g
e. Lift the base’s antenna to a fully vertical posi-
tion.
Move the handset closer to the base.
Move the base away from other electrical de-
vices.
Return the handset to the base to rechar
g
e
the battery pack.
The handset stops workin
g
or works
poorly durin
g
a call.
Move the handset closer to the base.
Lift the base’s antenna to a fully vertical posi-
tion.
If the base lost power while the handset was
off of it, the security access-protection code
mi
g
ht have chan
g
ed. With the handset re-
moved from the base, restore power to the
base, then place the handset back on the
base. The CHARGE indicator li
g
hts, indicat-
in
g
that the code is set a
g
ain.
Be sure the handset’s battery pack is
char
g
ed. (If the battery pack power is too low,
it does not have enou
g
h power to li
g
ht the
TALK/BATT LOW indicator.)
Problem Suggestion
43-1088_90.fm Page 18 Tuesday, August 17, 1999 2:57 PM