Radio Shack 43-1090 Cordless Telephone User Manual


 
14
PAGING
To page the person who has the hand-
set or to locate the handset when the
phone is not in use, hold down
PAGE
on the base for at least 2 seconds. The
handset beeps for 1 minute. To stop it
from beeping sooner, press
TALK
on
the handset twice.
Notes:
The phone goes off-hook (you
hear the dial tone) the first time
you press
TALK
to stop the hand-
set from beeping. If you do not
press
TALK
again, the phone re-
mains off-hook.
If you press
PAGE
for less than 2
seconds, the handset beeps for
only 2 seconds.
MEMORY DIALING
You can store up to 10 numbers in
memory, then dial a stored number by
pressing a one-digit memory location
number.
Each number you store can be up to
16 digits long.
Storing a Number in Memory
Note:
An error tone sounds and the
phone exits the programming mode if
you wait more than 20 seconds be-
tween each key press.
1. Lift the handset. If the TALK/BATT
LOW indicator lights, press
TALK
to turn it off.
2. Press
MEM
. The TALK/BATT LOW
indicator blinks.
3. Enter the number and any
TONE/
mode changes or
REDIAL/P
entries (see “Entering a Pause” on
Page 15).
43-1088_90.fm Page 14 Tuesday, August 17, 1999 2:57 PM