Filter
Top Products
22
Troubleshooting
Note:
If you use pulse dialing, be sure you have stored a tone
entry in another memory location (see “Using Tone Services on
a Pulse Line” on Page 19).
Testing Stored Emergency Numbers
If you store an emergency service’s number (police department,
fire department, ambulance) and you want to test the stored
number, make the test call during the late evening or early
morning to avoid peak demand periods. Remain on the line to
explain the reason for your call.
ˆ
Troubleshooting
We do not expect you have any problem with your telephone,
but if you do, the following suggestions might help.
Problem Suggestion
The keypad
does not
work.
• Move the keypad closer to the base. Raise the
base’s antenna to a vertical position.
• Ensure the phone’s modular cord and the AC
adapter are correctly and securely connected.
• Recharge the keypad’s battery pack.
• Reset the security access-protection code by plac-
ing the keypad on the base for about five seconds.
The call is
noisy.
Keep the headset and base away from interference
sources such as computers, remote control toys, wire-
less alarm systems, wireless intercoms and room moni-
tors, fluorescent lights, and electrical appliances.
43-1701.fm Page 22 Wednesday, September 20, 2000 8:48 AM